Testox Metallic Test Stations by Gerome

Gerome's design recognizes that working room and good access to terminals are important to the corrosion engineer when he is inside his test station.
  • Testox Cathodic
    Protection Test Stations

    by Gerome

    Series 100
    Pipe-Mounted Test Station

    • 5 terminals standard
    • 7 terminals available
    • 6" high, 3-3/4" wide, 2-1/2" deep
    • Slip fit: 3/4" - 3"
    • Threaded: 3/4", 1", 1-1/4", 1-1/2", 2", 3"
    • Shipping weight: 2-1/2 lbs
    • Pre-wired or unwired
    • Plastic or aluminum conduit

    Series 300
    Mini-Series Test Station

    • 2 or 4 terminals standard
    • 5" high, 1-1/2" wide , 2-3/4" deep
    • Slip fit: 3/4"
    • Threaded: 3/4"
    • Available with conduit
    • Shipping weight: 1 lb

    Series 400
    Pipe Mounted Test Station

    • 5 terminals standard, up to 10 terminals available.
    • 6-3/4" high, 5" wide, 3" deep.
    • Optional back and sides.
    • Watertight.
    • Slip-fits: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"
    • Threaded: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"
    • Shipping weight: 2-1/2 lbs.

    Series 500
    500 For Urban Paved Locations
    500A For Burial in Sand or Dirt

    • 5 terminals standard
    • Corrosion resistant cast aluminum top
    • Durable plastic pipe body
    • 15-1/2" high, 4-1/2" diameter (500)
    • 18-1/2" high, 4-1/2" or 6-1/2" diameter (500A)
    • Anchoring bolts
    • Ship. weight: 3 lbs (500), 4 lbs (500A)
      
     

    Readily accessible terminal is mounted directly beneath cover.

    Series 600
    Right-of-Way Test Station

    • 5 terminals standard
    • 7 terminals available
    • Pre-wired or unwired
    • Solid steel construction
    • 6 feet long with an I.D. of 3" for rugged use. Also features an arrangement for locking cap to the test station (lock not included)
    • Shipping weight: 70 lbs

    Series 700
    Pipe Mounted Test Station

    • 5 terminals standard

    • Up to 10 terminals available

    • 8" high, 4-1/2" wide, 2-1/2"deep

    • Slip fits: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"

    • Shipping weight: 3-1/2 lbs

    Gerome's design recognizes that working room and good access to terminals are important to the corrosion engineer when he is inside his test station. Uncovered, the terminal board of the Series 700 is wide open and available from every side. Covered, it is a neat appearing aluminum casting of rugged quality.

    Series 800
    Pipe Mounted Test Station

    • 5 terminals standard
    • Up to 7 terminals available
    • Screw-on cover
    • Body and cover of cast aluminum
    • Watertight with O-ring seal
    • Thread sizes: 3/4", 1" 1-1/4"
    • 4-1/2" diameter
    • Shipping weight: 2-1/2 lbs

    Series 900
    Front and Back Access

    • 5 terminals standard
    • Up to 7 terminals available
    • Cast aluminum cover
    • Waterproof
    • Slip fit: 3"
    • Threaded: 3"
    • 11" high, 4-1/2" diameter
    • Shipping weight: 4-1/2 lbs

    Series 1000
    Pipe Mounted Test Station

    • 8 terminals standard
    • Other sizes available
    • 32 square inches of terminal board
    • Double hub
    • Dual conduit entry
    • Easily takes 2/0 cable in and out
    • 8" high, 8-3/8" wide, 2-1/2" deep
    • Sip fit: 1", 1-1/4"
    • Thread sizes: 1", 1-1/4"
    • Shipping weight: 5 lbs

    Series 2000
    Pipe Mounted Test Station

    • 8 terminals standard
    • Other sizes available
    • 32 square inches of terminal board
    • Single hub
    • Single conduit entry up to 3 inches.
    • Easily takes 2/0 cable in and out
    • 9" high, 8-3/8" wide, 2-1/2" deep
    • Slip fit: 1-1/2", 2", 3", 4"
    • Thread sizes: 1-1/2", 2", 3"
    • Shipping weight: 5-1/2 lbs

    Series 3000
    Marker Plate

    • Cast aluminum markers
    • Logo available on one or both sides
    • 6-1/4" high, 7-1/4" wide
    • Slip fit: 2"
    • Shipping weight: 1-1/2 lbs

    Series 4000
    Vent

    • Cast aluminum vent
    • Top slot to hold marker (pictured on right side of grouping)
    • 3-3/8" high, 7-1/4" diameter
    • Shipping weight: 3 lbs

    Series 5000
    Vent with Marker Plate

    • Cast aluminum vent with marker
    • Logo available on one or both sides
    • 4-7/8" high, 7-1/4" wide
    • Slip fit: 2", 2-1/2", 3", 4"
    • Shipping weight: 4 lbs

    Series 9007
    Combination Vent & Test Station

    • Cast aluminum
    • Nickel plated brass terminals
    • Stainless steel cover bolts with stainless steel helicoils
    • Slip fit: 3"
    • Standard 5 terminals, available vent only -- no board, and cast name plate
    • 4-7/8" length, 7-1/4" deep
    • Shipping weight: 4-1/2 lbs.