Model SRM-100 Digital Soil pH & Resistivity Tester by American Innovations

Capture Soil Resistivity and pH in Minutes with a Single Probe
SKU
SRM-100-Group
Grouped product items
Product Name Qty
Model SRM-100 Digital Soil pH & Resistivity Tester, Complete Kit, by American Innovations
$1,950.00
Model SRM-100 Subsurface Digital Soil pH & Resistivity Subsurface Tester by American Innovations
$1,500.00
Model SRM-100 Digital Soil pH & Resistivity Tester, Bell Hole Kit, by American Innovations
$1,100.00

Description

Use the SRM100 soil resistivity and pH meter to: 

 Work faster – An SRM100 can curtail the time it takes to complete AC tower pylon inspections, certain ECDA surveys, or other assessments. That’s because traditional readings with a four-pin process can take up to 20 minutes each whereas the SRM100 measures soil pH and resistivity simultaneously in less than two minutes. 

Improve accuracy – The single-probe configuration eliminates errors due to miscalculations or incorrect probe spacing and depth. 

Lower costs – The SRM100 helps you save on groundbed installations by enabling your crews to spend less time setting up measurement equipment and more time digging. 


Features

Three probe options
Each SRM100 comes with one or more probes. You can choose to include a bell hole probe, a subsurface probe, or both. 

Protective case
No matter which probe configuration you choose, your SRM100 and probe(s) will be housed in a crush-proof, water-resistant case for protection from the elements in outdoor applications. 

Digital circuitry
Digital circuitry allows for repeatable readings with improved accuracy. 

Self-calibration
An internal calbiration circuit allows the SRM100 to self-calibrate in the field. 

LCD display
The two-line display is easy to read in most light conditions. 

Accessible batteries
The battery is accessible via a door on the back of the unit for easy replacement. 

 

( A ) LCD Display (2 lines)
( B ) Mode Selection Switch for Soil pH or Resistivity
( C ) Bell Hole Probe or Subsurface Probe Connection
( D ) Battery Door on Back of Case
( E ) Calibration Switch
( F ) On/Off Switch
 
Specifications

Meter

Dimensions

7.5 x 4.75 x 2.25 inches

Weight

2.5 lbs without probe

Environmental Protection

ABS high-impact plastic, corrosion proof, sealed to NEMA4 / IP64

Resistivity Range

0 to 1.5 Mohm-cm

Resistivity Accuracy

± 0.5% of reading

pH Range

3 to 10 standard units

pH Accuracy

± 0.5 standard units

Display

LCD, 2 lines x 16 characters

Switches

NEMA4 / IP64 sealed toggle switches

Power Supply

4 AA alkaline batteries for approximately 100 hours of continuous operation

Temperature & Humidity

-15 to 60ºC operating, 0-100% RH, non-condensing

Probe

Bell Hole Probe


T-handle 12 inches by 5/8-inch diameter shaft of carbon steel construction with 3⁄4-inch diameter measurement sensor for pH and resistivity; probe wire with coiled cable for direct connection to soil probe meter 

Subsurface Probe

T-handle, 40 inches by 5/8-inch diameter shaft of carbon steel construction with ¾-inch diameter measurement sensor for pH and resistivity; probe with cradle for direct connection to soil meter.

Protective Case

Case

Watertight, crush proof, and dust proof with easy-open, double-throw latches, open-cell core with solid-wall design, o-ring seal, fold down handles, stainless steel hardware and padlock protectors.

Outside Dimensions

Outside dimensions 53 x 16 x 6-¼ inches

Lid & Back

Double-walled construction for added crush resistance.

Weight

20 pounds without soil probe meter, bell hole probe, subsurface probe and accessories.

Inside Case

Fitted with 2.2-pound density polyethylene foam. Foam insert is molded to fit the soil probe meter, bell hole probe, subsurface probe, maintenance kit and soil probe meter manual.